RESEARCH
PUBLICATIONS
JOURNAL PAPERS
2024
R.L. Black, D. Anjaria, J. Genee, V. Valle, J.C. Stinville, “Micro-strain and cyclic slip accumulation in polycrystalline nicke-based superalloy,” Acta Materialia, 266 (2024), doi: 10.1016/j.actamat.2024.119657. Link
W. Li, O. Sigmund, and X.S. Zhang, “Analytical realization of complex thermal meta-devices,” Nature Communications, 5527 (2024), doi: 10.5281/zenodo.11211414. Link
2023
C. Nieves, S. Edward, M. Kulkarni, H. Golecki, “DESIGN OF FABRIC-REINFORCED POLYURETHANE COMPOSITES FOR AORTIC AND OTHER CARDIAC CONSTRUCTS,” Proceedings of the 2023 Design of Medical Devices Conference, doi: 10.1115/DMD2023-1689. Link
C. Kim, K.H. Matlack, “In situ nonlinear Rayleigh wave technique to characterize the tensile plastic deformatio of stainless steel 316L,” Ultrasonics 131(2023), doi: 10.1016/j.ultras.2023.106945. Link
J. Han, R. Bhatta, H. Wang, “Bio-adhesive Macroporous Hydrogels for In Situ Recruitment and Modulation of Dendritic Cells,” Cellular and Molecular Bioengineering, doi: 10.1007/s12195-023-00770-2. Link
M.J. Dewey, R.S.H. Chang, A.V. Nosatov, K. Janssen, S.J. Crotts, S.J. Hollister, B.A.C. Harley, “Generative Design Approach to Combine Architected Voronoi Foams with Porous Collagen Scaffolds to Create a Tunable Composite Biomaterials,” Acta Biomaterialia, doi: 10.1016/j.actbio.2023.10.005. Link
2022
J. Han, J. Park, R. Bhatta, Y. Liu, Y. Bo, J. Zhou, H. Wang, “A Double Crosslinking Adhesion Mechanism for Developing Tough Hydrogel Adhesives,” Acta Biomaterialia, doi: 10.1016/j.actbio.2022.07.028 . Link
2021
C. Kim, H. Yin, A. Shmatok, B. C. Prorok, X. Lou, and K. H. Matlack, “Ultrasonic nondestructive evaluation of laser powder bed fusion 316L stainless steel,” Additive Manufacturing, vol. 38, no. 101800, pp. 1–12, 2021, doi: 10.1016/j.addma.2020.101800. Link
R.B. Vieira, H. Sehitoglu, J. Lambros, “Representative volume elements for plasticity and creep measured from high-resolution microscale strain fields”, Acta Materialia 214 (2021) 117021, https://doi.org/10.1016/j.actamat.2021.117021. Link
Zhao, Z., Zhang, X.S., “Additive Manufacturing of Topology-Optimized Graded Porus Structures: An Experimental Study,” Leveraging Materials in Topology Optimization, 73(2021), https://doi.org/10.1007/s11837-021-04705-y Link
2020
Kim Gustafson, Oyuna Angatkina and Aimy Wissa, “Model-based design of a multistable origami- enabled crawling robot”, Smart Mater. Struct. 29 (2020) 015013 (9pp) https://doi.org/10.1088/1361-665X/ab52c5. Link
R.B. Vieira & J. Lambros, “Machine Learning Neural-Network Predictions for Grain-Boundary Strain Accumulation in a Polycrystalline Metal”, Experimental Mechanics (2021) 61:627–639 https://doi.org/10.1007/s11340-020-00687-1. Link
Raeann VanSickle, David Foehring , Huck Beng Chew , John Lambros, “Microstructure effects on fatigue crack growth in additively manufactured Ti–6Al–4V”, Materials Science & Engineering A 795 (2020) 139993, https://doi.org/10.1016/j.msea.2020.139993. Link.
2019
Y. Saito, F. Fernandez, D.A. Tortorelli, W.S. Compel, J.P. Lewicki, J. Lambros, “Experimental Validation of an Additively Manufactured Stiffness-Optimized Short-Fiber Reinforced Composite Clevis Joint”, Experimental Mechanics, Vol. 59, No. 6, (2019), 859–869 https://doi.org/10.1007/s11340-019-00514-2. Link.
2018
Foehring, D., Chew, H. B., Lambros, J. (2018). “Characterizing the tensile behavior of additively manufactured Ti-6Al-4V using multiscale digital image correlation” Materials science & engineering. A, Structural materials: properties, microstructure and processing, 724, 536-546. Link
2017
Y. Wu, E. Ertekin, H. Sehitoglu, “Elastocaloric cooling capacity of shape memory alloys – Role of deformation temperatures, mechanical cycling, stress hysteresis and inhomogeneity of transformation”, Acta Materialia (2017), doi: 10.1016/j.actamat.2017.06.012. Link
2015
Martin, D.A., Boron, K., Obstalecki, M., Kurath, P., Horn, G.P. (2015), “Feasibility of Knots to Reduce the Maximum Dynamic Arresting Load in Rope Systems”, Journal of Dynamic Behavior of Materials, 1:214-224. DOI: 10.1007/s40870-015-0015-5. Link
Garrett J. Pataky, Elif Ertekin, Huseyin Sehitoglu, “Elastocaloric cooling potential of NiTi, Ni2FeGa, and CoNiAl,” Acta Materialia, 96, 420–427, 2015. Link
2014
Casperson, M. C., Carroll, J. D., Lambros, J., Sehitoglu, H., & Dodds, R. H. (2014). “Investigation of thermal effects on fatigue crack closure using multiscale digital image correlation experiments”. International Journal of Fatigue, 61, 10–20. Link
Berke, R.B, Lambros, J. (2014), “Ultraviolet digital image correlation (UV-DIC) for high temperature applications.” Review of Scientific Instruments. 85:045121. Link
Martin, D.A., Obstalecki, M., Kurath, P., Horn, G.P. (2014), “An approach for quantifying dynamic properties and simulated deployment loading of fire service escape rope systems”, Experimental Techniques, DOI:10.1111/ext.12073. Link
2013
Horn, G.P., Chaussidon, J., Obstalecki, M., Martin, D.A. Kurath, P., Backstrom, R.G., Kerber, S., (2013), “Evaluating Fire Service Escape Ropes at Elevated Temperatures and Fire Conditions”, Fire Technology, 51(1):153-171. DOI: 10.1007/s10694-013-0373-2. Link
2011
Padilla, H., Lambros, J., Beaudoin, A. J., & Robertson, I. (2011). “Spatiotemporal Thermal Inhomogeneities During Compression of Highly Textured Zirconium“. Experimental Mechanics, 51(7), 1061-1073. https://doi.org/10.1007/s11340-010-9425-4 Link
2009
McDonald RJ, Efstathiou C, Kurath P. “The Wavelike Plastic Deformation of Single Crystal Copper.” ASME. J. Eng. Mater. Technol. 2009;131(3):031013-031013-7. Link
2005
Canadinc, D. H. Sehitoglu, H. Maier, J. Dadda, and P. Kurath, “Prediction of Yield Strength in Shear Utilizing a Visco-Plastic Self-Consistent Model,” submitted for publication to Maine Motor Transport Association, October 2005.
Major, M. J., A. Beaudoin, P. Kurath, and E. Hsiao-Wecksler, “Aggressive Inline Skating: Biomechanics of Landing, and Balancing on a Grind Rail,” submitted to the International Society of Biomechanics Conference, 2005. Link
McDonald, R. J. and P. Kurath, “Deformation and Life Estimates for a Metal Matrix – Spherical Particulate Composite Subjected to Thermo-Mechanical Loading,” ASME Journal of Engineering Materials and Technology, 2005. Link
Sanger, C. L., R. J. McDonald, and P. Kurath, “Prediction of Welding Residual Stresses and Redistribution/Relaxation due to Cyclic Loading,” SAE Transactions, 2005. Link
Griffon, D. J., A. Stoller, D. Schaeffer, M. R. Seddighi, A. L. Johnson, and P. Kurath, “Restoration of 1.5 mm Cortical Screw fixation in the Distal Feline Radii – Evaluation of Two Cement Augmentation Techniques,” Vet Surg 2005, 34:3, 223-230, 2005.
Hutchinson, G. S., D. J. Griffon, A. M. Siegel, G. J. Pijanowski, P. Kurath, J. C. Eurell, and A. L. Johnson, “Evaluation of a Resorbable Calcium Phosphate Bone Cement for Augmentation of 4.0 Millimeter Cancellous Orthopedic Screws in the Canine Pelvis,” American Journal of Veterinary Research, 2005 (in press). Link
2004
Major, M. J., P. Kurath, M. Bange, A. Beaudoin, and E. T. Hsiao-Wecksler, “Biomechanical Analysis of Aggressive In-line Skating: Landing and Balance During a Stall,” submitted to the International Society of Electromyography and Kinesiology (ISEK) Conference, Boston, MA, 2004. Link
2002
Horn, G., Mackin, T., and Kurath, P. (2002) “Composite Machining Damage Quantification using Thermoelastic Stress Analysis”, Polymer Composites, 23 (2), 193-200. Link
Kallmeyer, A. R., A. Krgo, and P. Kurath, “Evaluation of HCF Multiaxial Fatigue Life Prediction Methodologies for Ti-6A1-4V,” Journal of Engineering Materials and Technology, 124:2, 229-237, 2002. Link
2001
Horn, G., Mackin, T., and Kurath, P. (2001) “Estimating the Residual Fatigue Lifetimes of Impact-Damaged Composites Using Thermoelastic Stress Analysis”, Polymer Composites, 22 (3), 420-431. Link
Kurath, P. and J. H. Jones, “Multiaxial Thermomechanical Deformation Utilizing a Non-Unified Plasticity Model,” SAE Technical Paper Series No. 2000-01-0782, Trans. SAE, Sec. 5, Journal of Materials and Manufacturing, Society of Automotive Engineers, Warrendale, PA, 1-18, 2001.
1997
Jiang, Y. and P. Kurath, “An Investigation of Cyclic Transient Behavior and Implications on Fatigue Life Estimates,” Journal of Engineering Materials and Technology, 119, 161-170, 1997. Link
Jiang, Y. and P. Kurath, “Nonproportional Cyclic Deformation Critical Experiments and Analytical Modeling,” International Journal of Plasticity, 13:8-9, 743-763, 1997. Link
1996
Jiang, Y. and P. Kurath, “Characteristics of the Armstrong-Frederick Type Plasticity Models,” International Journal of Plasticity, 12:3, 387-415, 1996. Link
Jiang, Y. and P. Kurath, “A Theoretical Evaluation of the Incremental Plasticity Hardening Algorithms for Cyclic Nonproportional Loading,” Acta Mechanica, 118, 213-234, 1996. Link
Lease, K. B., R. I. Stephens, Y. Jiang, and P. Kurath, “Fatigue of a Particulate Reinforced Aluminum Metal Matrix Composite Subjected to Axial, Torsional and Combined Axial/Torsional Loading Conditions,” International Journal of Fatigue and Fracture of Engineering Materials and Structures, 19:8, 1031-1043, 1996.
1995
Kurath, P. and Y. Jiang, “Analysis of Residual Stresses and Cyclic Deformation for Induction Hardened Components,” SAE Technical Paper Series No. 950707, Trans. SAE, Sec. 5, Journal of Materials and Manufacturing, Society of Automotive Engineers, Warrendale, PA, 603-617, 1995
1994
Karayaka, M. and P. Kurath, “Deformation and Failure Behavior of Woven Composite Laminates,” Journal of Engineering Materials and Technology, 116:2, 222-232, 1994. Link
1992
Swellam, M. H., P. Kurath, and F. V. Lawrence, Jr., “Electric-Potential-Drop Studies of Fatigue Crack Development in Tensile-Shear Spot Welds,” Transactions of the American Society for Testing and Materials, ASTM STP 1122, 383-401, 1992. Link
Technical magazines
2007
G. Horn, E. Timmons, E. and P. Kurath (2007), “Escape Rope Performance at Elevated Temperatures and Under Dynamic Loads”, Fire Engineering, 160 (7), pp. 99-106. Link